Your cart is currently empty!
-
Built to WORK!
-
Built to PLAY!
-
Built to LAST!
-
Built to PERFECTION!
-
Built BEAUTIFULLY!
-
Built for YOU!
The BLADE grinder is the embodiment of nearly a decade of experience gained through hard work and dedication striving to build the zenith of belt grinders. Featuring the futuristic VORMAC CAM Tensioning System (a first for belt grinders worldwide!) and the Zero-Zone tracking mechanism this machine simply outclasses and outperforms its competitors. With a super-quality hard-wearing powder coated finish, hardened pivot shoulder bolts, high-tensile fasteners, proper bushes installed in the pivoting locations, attention to detail and manufactured with care – these machines are made to last!
Belt tensioning in a pinch…
- Completely unique cam-lock design.
- Smooth and user-friendly operation.
- No need to push to the next “click” like traditional ratchet systems.
- Manufactured from toughened alloy steel for a lifetime of dependability.
- No belt tension variation when machine is run in reverse.
Switchable orientation…
- Quickly tilts from vertical to horizontal.
- Locking mechanism in easy reach.
- Solid stand with hardened fasteners.
- Hand-knobs interchangeable for comfortable operation.
BLADE PACKAGES:
1.5kw Variable Speed
0.75kw Variable Speed
1.5kw Single Speed
0.75kw Single Speed
BASIC – No Motor
- 1.5kW Three-phase 4-pole Motor (runs off single phase)
- VFD – 1.5kW – Speed Control
- Remote Control Box (wired)
- VORMAC CAM Tension System
- Drive Wheel (60 x 150mm)
- Octo-Arm with Fully Adjustable Tool Rest
- Platen Attachment on Arm
R25 200
- 0.75kW Three-phase 4-pole Motor (runs off single phase)
- VFD – 0.75kW – Speed Control
- Remote Control Box (wired)
- VORMAC CAM Tension System
- Drive Wheel (60 x 150mm)
- Octo-Arm with Fully Adjustable Tool Rest
- Platen Attachment on Arm
R24 100
- 1.5kW Single-phase 2-pole Motor
- Single direction (forward)
- VORMAC CAM Tension System
- Drive Wheel (60 x 150mm)
- Octo-Arm with Fully Adjustable Tool Rest
- Platen Attachment on Arm
R20 400
- 0.75kW Single-phase 2-pole Motor
- Single direction (forward)
- VORMAC CAM Tension System
- Drive Wheel (60 x 150mm)
- Octo-Arm with Fully Adjustable Tool Rest
- Platen Attachment on Arm
R19 200
- Platen Attachment on Arm
- VORMAC CAM Tension System
- Includes crowned Drive Wheel (60 x 150mm) (for 19 or 24mm shafts – keyed)
R16 900
ACCESSORIES:
Hollow Grinding Table
Small Contact Wheels
Small Wheel Extension
Platen
Extension Arm
Contact Wheels
Octo-Arm Tool Rest
Mini Wheel Attachment
Mini Contact Wheels
With this attachment hollow grinding underneath contact wheels are made easy. Open and clear on both sides of the wheel for good viewing of layout lines that remain visible from above while grinding. It mounts in front of the Octo-Arm (with tool rest removed) and can be positioned at any comfortable angle. Fine vertical adjustments are made with a knob to move the table surface in relation to the contact wheel. Contact wheels up to 400mm x 25mm can be used with standard 2000mm belts. Larger wheels will require 2200mm belts and a spacer mount plate.
R1 950
Contact wheels for mounting on Small Wheel Extension.
- 60mm dia X 25mm wide – R680
- 60mm dia X 50mm wide – R730
- 80mm dia X 25mm wide – R760
- 80mm dia X 50mm wide – R830
- 120mm dia X 25mm wide – R910
- 120mm dia X 50mm wide – R970
Used to mount smaller wheels (60mm to 120mm diameter) with clearance around sides for grinding deep hollows.
R720
Usually supplied standard with BLADE packages. Can tilt 45 degrees up or down with 250mm long flat between wheels.
R2 250
38mm square x 400mm long solid aluminum arm used to mount contact wheels.
R410
38mm square x 400mm long metal tubing arm used to mount contact wheels.
R410
Wheels are mounted on the machine via square arms (available separately). High quality contact wheels with a polyurethane surface available in both 25mm and 50mm wide options and the following diameters:
- 150mm x 25mm – R930
- 150mm x 50mm – R990
- 200mm x 25mm – R1 230
- 200mm x 50mm – R1 480
- 300mm x 25mm – R2 350
- 300mm x 25mm plus sanding flat – R2 550
- 300mm x 50mm – R2 750
- 300mm x 50mm plus sanding flat – R3 150
Multi-adjustable and accurate positioning are made easy with this articulating arm assembly. Machined from either aluminum or thick-walled metal tubing with 25mm 304 SS shafts. The Octo-Arm includes a height-adjustable tool rest which also tilts in the horizontal position. The hollow grinding table attachment (available separately) requires the Octo-Arm for positioning.
R2 750
This attachment accepts mini wheels used for grinding small curvatures.
R1 650 (excluding wheels)
High quality polyurethane covered mini wheels mounted in the Mini Wheel Attachment and used for grinding small curvature. Available in 50mm wide sizes:
- 24mm dia – R290
- 36mm dia – R290
- 50mm dia – R290
SPECIFICATIONS:
VARIABLE SPEED MODELS
SINGLE SPEED MODELS
Motor: 0.75kW / 1.5kW
Speed control: Full control with Variable Frequency Drive (VFD)
Belt direction: Forward / Reverse (using VFD)
Belt speed (With standard settings on VFD): Approx. 0 to 1400 MPM / 4600 SFM (no load)
Space occupied: 450mm (w) x 600mm (d) x 580mm (h) (approx)
Weight: 40-80kg depending on options and fitted accessories
Belt size: 50 x 2000mm / 25 x 2000mm
Contact Wheel size: Up to 500mm diameter
Shipping weight: Approx 85kg
Shipping box size: 800mm(w) X 400mm(d) X 550mm(h)
Motor: 0.75kW / 1.5kW
Speed control: Single speed (no VFD)
Belt direction: Forward only
Belt speed: Approx. 1320 MPM / 4330 SFM (no load)
Space occupied: 450mm (w) x 600mm (d) x 580mm (h) (approx)
Weight: 40-80kg depending on options and fitted accessories
Belt size: 50 x 2000mm / 25 x 2000mm
Contact Wheel size: Up to 500mm diameter
Shipping weight: Approx 85kg
Shipping box size: 800mm(w) X 400mm(d) X 550mm(h)